RK66S – Risco Seismic Detector

Seismic Detector
From strong rooms, vaults and safes to ATMs and vending machines, RISCOs Seismic Detector detects all known types of intruder attacks including sledgehammers, diamond head drills, explosives and hydraulic or thermal tools.

Product Info
The detector is extremely simple to install and can be installed on the RISCO Bus which allows unique remote parameter setting and diagnostic capabilities or as a regular relay detector with built-in EOL resistors. A metal mounting plate, test generator, anti-drilling shield and other popular accessories come as standard.

Specs

Technical specifications

RK66S000000B Seismic with MP & Tester

• Detection coverageUp to 5m (16 6) radius
• Adjustable vibration sensitivity8 levels by dip switch
• Adjustable vibration signal duration4 levels by dip switch
• Explosion and sledge hammer detectionDip switch selectable
• Vibration generationExternal or internal test generator
• Sensitivity indicationBar graph LEDs
• Self-test indicationsPower, low-voltage, logger memory,piezo sensor, temperature sensor
• RISCO BusRemote parameter setting an diagnosticsvia RISCO Group security system keypadsand PC remote software

• EOL resistorsBuilt-in, jumper selectable
• Operating voltage9 to 16V DC
• Current consumption20mA @ 12V DC (typical)
• Alarm contacts24 VDC, O.1A, Form C changeover relay
• Tamper contacts24 VDC, 0.1A
• Alarm contact hold time2.5 seconds
• Analog signal outputFor signal analysis and calibration
• Remote test inputYes
• Sensitivity reduction inputYes
• RISCO BusRS485
• Operating temperature-40C to +70C (-40F to 158F)
• Storage temperature-50C to +70C (-58 to 158F)
• Ingress protection ratingIP43
• Impact ratingIK08
• RFI immunityAccording to EN50130-4
• Dimensions102 x 27.5 x 80.2mm (4.0 x 1.1 x 3.2)
• Weight220 g (7.7oz)